1. Automatic sodium ion exchanger uses ion exchange principle to remove calcium, magnesium and other scaling ions in water.When the raw water containing hardness ions through the resin layer in the exchange, the calcium and magnesium ions in the water and the resin adsorption of sodium ions replacement, resin adsorption of calcium and magnesium ions and sodium ions into the water, so from the exchange out of the water is to remove the hardness of the softening water.
2. Because the hardness of water is mainly formed and expressed by calcium and magnesium, cation exchange resin (water softener) is generally used to replace the Ca2+ and Mg2+(the main component of scale formation) in the water. With the increase of Ca2+ and Mg2+ in the resin, the efficiency of removing Ca2+ and Mg2+ in the resin is gradually reduced.
3. When the resin absorbs a certain amount of calcium and magnesium ions, it must be regenerated. The regeneration process is to wash the resin layer with salt water in the salt box, and the hardness ions on the resin are replaced. With the regeneration waste liquid discharged from the tank, the resin resumes its softening and exchange function.
4. Because the hardness of water is mainly formed by calcium, magnesium and said that the hardness of water is mainly formed by calcium, magnesium and said that the principle of sodium ion exchange softening treatment is the raw water through the sodium type cation exchange resin, so that the hardness of Ca2+, Mg2+ in water and the resin Na+ exchange phase, so as to adsorb the water of Ca2+, Mg2+, so that the water is softened

​FAQ

1. What's the delivery time?
We will deliver the product in 7 days after receiving the deposit.
2. What's your payment terms?
We can accept various payment terms if it is convenient for you.
3. what's your MAQ?
Our MAQ is 1 piece.
4. What's the lifetime of the wearing parts?
The material of our product is of high quality, and the lifetime of our wearing parts is twice longer than the others,including the roller skin, die and bearing.
5. What is your warranty?
12 months except the spare parts.
6. Will you send engineers to install the plant?
Of course yes,but at an extra cost will be paid by customers. Or you can get local contractors to do the commissioning and we send one supervising engineer.
7. Do you have some foreign customers using your equipments?
Yes , we have customers all over the world

Pictures